Ozito SCMS-1621 Sliding Compound Mitre Saw. It is a versatile DIY power tool designed for making crosscuts, bevels, and mitre cuts in timber. The "sliding" feature allows the saw head to move back and forth, significantly increasing the width of the material it can cut compared to a standard mitre saw.
Technical Specifications
According to the identification plate in the photos:
Model: SCMS-1621
Blade Diameter: 210\text{mm} (8 ¼")
Bore Size: 16\text{mm}
Power: 1500\text{W} (S1) / 1800\text{W} (S2)
No Load Speed: 5,000\text{ min}^{-1}
Input: 230-240V ~ 50Hz
Key Features & Condition
Design & Build
Sliding Rails: Dual rear-mounted rails allow the saw to handle wider boards.
Mitre & Bevel Adjustments: Features a rotating base for mitre cuts (angles visible on the scale) and a tilting head for bevel cuts.
Work Support: Includes side support bars (material extensions) to help stabilize longer workpieces.
Safety & Dust Control: Equipped with a transparent blade guard, a top carry handle, and a dust collection bag.
Observed Condition
Electrical: One of the photos shows the power cord has been cut or stripped at the end (exposed wires). This saw should not be plugged in or used until a proper plug is fitted and the tool is safety tested.
Wear: The rails show some light surface oxidation/rust, which is common if stored in a damp environment. The overall body shows moderate use but appears structurally intact
